CO2 Fractional Laser Resurfacing Rf Microneedle Treatment For Skin Tightening
Detailed Product Description
|
RF: |
2MHz & 50W |
Feature:: |
Face Lift,Skin Rejuvenation,Wrinkle Remover |
|
Power Voltage: |
110/220V; 50/60Hz |
Work Program: |
CW / Pulse |
|
Product Name: |
Fractional RF Microneedle |
Operation Interface: |
8.4 |
CO2 Fractional Laser Resurfacing Rf Microneedle Treatment For Skin Tightening
Expected of Fractional Treatmetn result:
Shortly after the treatment there will be moderate redness and some light swelling of the treated zone in square-shaped patterns the size of the treatment applicator. The redness should stop after a few hours, and the swelling should go down within 12-24 hours. You should apply the products given to you at your treatment as needed to moisturize the skin, and you should not use any aggressive products or a Clarisonic for a few days. This will help the healing process. As the sites continue to heal you may experience itchiness, which can be halted with a simple over-the-counter allergy pill if you desire or by applying hydrocortisone. Do not scratch, itch, or pick at the sites. After about 24-72 hours, you will notice small pin-point crusts in each ablated spot where the electrode pins of the treatment head contacted the skin. These will naturally exfoliate and can easily be covered with makeup.
The photo below demonstrates what your skin will look like after the treatment. This photo is taken one day after treatment. Over the next day or so, each pink spot will become a small crust which will exfoliate on its own.These sites are easily covered with makeup.
You should have realistic expectations and remember that multiple sessions will be necessary. Matrix RF results will continue to develop over the coming months, as new collagen is created. Each session will further ablate and resurface the skin, resulting in a reduction of wrinkles, skin laxity, textural irregularities, and scarring. Follow-up treatments will be needed in the future to maintain results and are offered at a discounted rate after the initial treatment package is completed. Most often people elect to have maintenance procedures done every 6-12 months.
Advantage of fractional RF treatment:
FRM Technology (Fractional RF Microneedle)
FRM therapy is newly-developed patented controlled invasive skincare technology, which can minimize epidermis injury (almost zero). During the treatment operation, 49 specially designed and fractional arrayed micro needles will swiftly penetrate epidermis and reach dermis area to create micro pores, these micro pores can stimulate cell growth factors to induce growth factors repair stimulated area naturally, high-frequency wave will be released meanwhile to target on treated area to promote collagen regrowth, therefore treatment purpose can be achieved. The therapy is totally safe with minimized epidermis damage and pain.
Flora Fractional RF Microneedle (FRM) system is suitable for treating various types of skin with different adjustable penetration depth.
Treatment
Treatment mechanism of Fractional RF
Fractional RF’s microneedle is insulated except 0.3mm of the end of the needle where the RF comes out.
Fractional RFis different from the laser because electro energy transforms into thermal energy.
The RF energy from the end of needle transfers energy from its point circle to nearby areas that causes coagulation and denaturalization. During the insertion of Fractional RFneedles to skin, epidermis will get micro holes but will not get a thermal damage while RF energy is emitted. Thus, it could minimize the side effects of pigmentation and others.
Treatment scope:
1.Continuous treatment from Epidermis to dermis –Tightening, Pore size,
Superficial scar, Wrinkles
2.Stronger treatment power throughout dermis area-lifting tightening, wrinkles,
flushing, Lightening and Acne.
3, Bio-modulation effect by combination treatment with fibroblast media through
micro delivery hole, Micro electrodes make-scar, Acne, Pigmentation, PIH,
Flushing, Whitening and moisturizing.
Post Treatment Care
Mild redness and swelling may occur a few hours and up to 24 hours after treatment. Massage and excessive sun exposure should be avoided at this time. More aggressive treatments may result in skin flaking as the new skin layer regenerates. Moisturisers and broad spectrum sunscreens are highly recommended during this recovery phase.
Pictures to show how it works:
Feature
Comparison on Fractional laser and Fractional RF
[Pic 1. Analysis on thermal changes of laser and Fractional RF]
Bipolar and Monopolar
ERS(Energy Reward System) and impedance checking
Microneedle tip and SRR tip for combination treatment
Advantage of insulated needle
Technical Parameers
|
Control System
|
Microcomputer
|
|
Operation Interface
|
8.4" Colorized Touch Screen
|
|
Power Voltage
|
110/220V; 50/60Hz
|
|
Needle Depth
|
0.5mm, 1mm, 1.5mm
|
|
Treatment Area
|
62mm²
|
|
Electrode No.
|
36 Pins
|
|
Work Program
|
CW / Pulse
|
|
RF
|
2MHz & 50W
|
Three Layer Therapy
Targeting three different target tissue with one single device is attracting both user and patient
Combination Treatment with Co2 Fractional
Once RF energy is penetrated into the dermis, column of target tissue in dermis processes to regenerate the skin. After the RF microneedle treatment, CO2 fractional laser is irradiating on epidermal area. Since light energy turns into thermal energy on a skin surface as shown in the picture, the thermal energy spreads and expands its area from the irradiation spot to its circle surroundings. Then, combination treatment of RF microneedle and CO2 fractional is flattening the rough skin.
Factory introduction
Factory building:
Production line:
Machine housing:
Machines:
Packing Boxes:
