
Add to Cart
Machine Introduction:
Principle | It works with 30MHZ high frequency |
Treatment | spider vein removal,vasuclar removal,blood vessels removal and red veins removal |
Advantage |
Non-invasive treatment, the treatment result will be seen at once, they will be removed after the first treatment. |
Technical Parameter:
Input voltage | 220V-50HZ/110V-60HZ |
Input power | 150W |
Output power | 0-100%±10% |
Output frequency | 30MHz |
Output voltage | AC 30-150V |
Treatment of needle wire | 0.01mm(Diameter) |
Output mode | Continuous and pulsed two modes |
Liquid crystal display | 8.4Inch |
Operating mode | Touching screen |
Dimensions |
395×460×130mmg |
Treatment scope
1.Vascular Lesions .Removal of red blood: all kinds of telangiectasia, cherry haemangioma etc.
2.Benign growths lesions.Remove skin protrusions: Milia, flat warts, junctional nevus, compound nevus,fat particles and other skin growths.
3.Pigmented lesions.Age spots, sunburn, pigmentation
The oldest and most common treatment for spider veins on the legs is sclerotherapy. This involves injection of a sclerosing agent into the veins, which irritates the vessels, causing them to scar and become less noticeable. Some surgeons use a concentrated (hypertonic) saline solution, while others use different sclerosing agents. Often, the veins do not actually go away, but become less visible because of the reaction around the walls of the vein. The injections may sting a bit, especially if saline is used, but the discomfort does not last long.
Another treatment which is sometimes effective is the use of a laser. This is especially true in the facial area, where the laser may be the preferred method of treatment.
Deep veins and varicose veins are not effectively treated with these methods. In order to treat varicose veins, surgery is usually performed for optimal results. Some differences regarding varicose veins include:
More than one treatment is often required, since all the veins will not respond to the first treatment. Also, since this is a progressive condition, the patient can expect new spider veins to occur over time, which may require treatment every few years to maintain the improvement.
Before after pictures
Working principle:
The micro-dots high-frequency lightning produces a 30Hz ultra high frequency electromagnetic oscillation,with the unique soft silk ( than hair thinner ), at 1/ 1000 second time break the hemoglobin, will release the energy transfer to the surface of the skin following removal of lesions, capillaries, and intravascular hemoglobin break make it into small molecules are absorbed by the skin tissue itself, so as to make it reach the disposable permanent eradication of red blood results, each treatment of red blood streak time should not exceed 15 minutes, precise digital control system, perfect and concise treatment procedures, simple operation is beneficial to quickly grasp.
Technical Parameter:
Input voltage |
220V-50HZ/110V-60HZ |
Input power |
150W |
Output power |
0-100%±10% |
Output frequency |
30MHz |
Output voltage |
AC 30-150V |
Treatment of needle wire |
0.01mm(Diameter) |
Output mode |
Continuous and pulsed two modes |
Liquid crystal display |
8.4Inch |
Operating mode |
Touching screen |
Dimensions |
395×460×130mmg |
Picture to show how it works:
Before after pictures
What are the signs of varicose veins?
Varicose veins can often be seen on the skin. Some other common symptoms of varicose veins in the legs include:
Advantage
1.30MHz Ultra High Frequency;
2.Realizing veins removal in one treatment;
3.Short recovery, no side effects;
4.Painless and comfortable treatment process
Our Factory
Contact us:
Beijing Nubway S&T Development Co., Ltd
our website: www.nubway.net
Tel: 0086 10-51206522
Email: martin@bjnubway.com / michael@bjnubway.com
Skype: martin101901
Phone: 0086 18255187684